转向剂形成人工应力遮挡的实验研究及有限元分析

针对水力压裂过程中采用的人工应力遮挡控制缝高技术,通过室内物理模拟实验,在转向剂浓度一定的条件下考虑携带液与地层压差、渗流量、时间等因素,采用电测法对人工岩芯表面应变进行了测试;利用非线性有限元方法对裂缝尖端应力进行计算,研究了转向剂形成人工应力遮挡的作用效果。结果表明采用转向剂可以建立3~4MPa的人工应力遮档,对采用转向剂的压裂设计和施工参数提出了建议。     

Modeling and prediction of bulk properties of open-cell carbon foam

The emerging ultralightweight material, carbon foam, was modeled with three-dimensional microstructures to develop a basic understanding in correlating microstructural configuration with bulk performance of open-cell foam materials. Because of the randomness and complexity of the microstructure of the carbon foam, representative cell ligaments were first characterized in detail at the microstructural level. The salient microstructural characteristics (or properties) were then correlated with the bulk properties through the present model. In order to implement the varying anisotropic nature of material properties in the foam ligaments, we made an attempt to use a finite element method to implement such variation along the ligaments as well as at a nodal point where the ligaments meet. The model was expected to provide a basis for establishing a process-property relationship and optimizing foam properties.The present model yielded a fairly reasonable prediction of the effective bulk properties of the foams. We observed that the effective elastic properties of the foams were dominated by the bending mode associated with shear deformation. The effective Young's modulus of the foam was strongly influenced by the ligament moduli, but was not influenced by the ligament Poisson's ratio. The effective Poisson's ratio of the foam was practically independent of the ligament Young's modulus, but dependent on the ligament Poisson's ratio. The effective Young's modulus of the carbon foam was dependent more on the transverse Young's modulus and the shear moduli of the foam ligaments, but less significantly on the ligament longitudinal Young's modulus. A parametric study indicated that the effective Young's modulus was significantly improved by increasing the solid modulus in the middle of the foam ligaments, but nearly invariant with that at the nodal point where the ligaments meet. Therefore, appropriate processing schemes toward improving the transverse and shear properties of the foam ligaments in the middle section of the ligaments rather than at the nodal points are highly desirable for enhancing the bulk moduli of the carbon foam.     

DYNAMICS ANALYSIS OF STOCHASTIC SPATIAL FLEXIBLE MULTIBODY SYSTEM 1)

轻质、高精度的柔性多体系统被广泛应用于实际工程领域中.由于实际设计公差、制造误差及环境温度等多种不确定因素的存在,使得柔性多体系统的结构参数(物理参数和几何参数)表现出随机性.具有随机结构参数的动力学模型能够客观地反映出真实系统的动力学行为,且结构参数的不确定性对空间柔性多体系统动力学响应的影响是不容忽视的.针对具有多个随机参数的空间柔性多体系统,提出了一种基于广义alpha算法的非侵入式随机柔性多体系统动力学计算方法.采用绝对节点坐标公式(absolute node coordinate formulation, ANCF)来描述柔性体, 推导建立多体系统动力学模型.利用混沌多项式展开(polynomial chaos expansion, PCE)法构建系统随机动力学方程的代理模型,然后将随机响应面法(stochastic response surface method, SRSM)嵌入广义-alpha方法中,分别采用改进抽样的回归方法(regression method of improved sampling, RMIS)和单项求容积法则(Monte Carlo simulation, MCR)来确定样本点.将数值计算结果与蒙特卡洛模拟(Monte Carlo simulation, MCS)结果进行对比, 验证了所提算法的有效性.在相同的定积分精度的条件下,根据单项求容积法则确定的样本点的计算结果稳定性更强, 且其计算效率更高.     

Finite element modeling of contact conditions in multibody system dynamics

In this paper a new method is developed for the dynamic analysis of contact conditions in flexible multibody systems undergoing a rolling type of motion. The relative motion between the two contacting bodies is treated as a constraint condition describing their kinematic and geometric relations. Equations of motion of the system are presented in a matrix form making use of Kane's equations and finite element method. The method developed has been implemented in a general purpose program called DARS and applied to the simulation and analysis of a rotating wheel on a track. Both the bodies are assumed flexible and discretized using a three dimensional 8-noded isoparametric elements. The time variant constraint conditions are imposed on the nodal points located at the peripheral surfaces of the bodies under consideration. The simulation is carried out under two different boundary conditions describing the support of the track. The subsequent constraint forces associated with the generalized coordinates of the system are computed and plotted. The effects of friction are also discussed.     

用间接边界元方法求解不可压缩孤立翼型绕流的一种库塔条件处理方法

本文对不可压二维翼型势流绕流的边界元法求解作了分析,在对基本方程与边界条件进行数值离散化时,将库塔条件代入基本方程。按本方法编制的计算机程序对若干算例进行了验算。结果表明,本文提出的方法是可靠的,该法计算简捷、方便,占用计算机内存少,具有实用意义。     

基于变形场测量数据主元压缩的模型参量反求方法

利用主元分析法对数字图像相关技术所测结构变形信息进行数据压缩,并进一步用于力学模型未知参量的反求计算。首先,为降低数字图像相关技术所测庞大数据的应用成本,提出利用主元分析法对结构表面变形场数据进行压缩,实现在保留结构表面变形信息主要特征的前提下显著降低数据量的目的;其次,针对压缩后的数据建立了基于最小二乘法的力学模型参量反求模型,并利用高斯牛顿法进行求解;最后,以具体算例从计算精度、收敛速度和抗噪性等方面验证了数据压缩对模型参量反求的效果。研究结果表明,所提方法在显著降低使用数据量的前提下,能够有效提高力学模型参量反求计算的收敛速度,特别是对于包含多个模型参数的反求问题,具有较高的精度和较好的稳定性。     

投影云纹法在研究加劲板后屈曲平衡路径及后屈曲模态转化过程的应用

本文应用投影云纹法研究受压加劲板的大挠度非线性问题。用投影云纹法测量加劲板后屈曲平衡路径,记录了随着载荷的增加,加劲板后屈曲模态变化的全过程。将云纹图输入微型计算机处理,获得了加劲板的全场位移和全场应力的分布情况。用投影云纹法所测得的结果同理论计算值基本吻合。     

三维有限体中平片裂纹的超奇异积分方程方法—Ⅱ.数值方法

超奇异积分方程方法的理论分析已在本文的第Ｉ部分中给出，这一部分是经的数值方法，及用此方法求解的若干典型的平片裂纹问题。     

Conservation laws of two coupled non-linear oscillators

This paper presents a novel approach to obtaining a complete set of time-dependent expressions for approximate conservation laws of two weakly non-linear coupled oscillators. The procedure developed for a non-resonant case is based on the field method concept of deriving a conservation law from an incomplete solution of a partial differential equation. Due to the non-linearity of the system being considered, this concept is combined with the multiple variable expansion procedure.     

一种扫描电镜准动态观察磨损表面形貌演变的方法

提出了一种扫描电镜准动态观察磨损表面形貌的方法－定位间断观察法，通过坐标定位和形貌特征定位，可简便，准确地确定跟踪观察位置。将试样表面的摩擦方向垂直于电子束的行扫描方向并使试样表面适度倾向二次电子探测器，可提高观察和拍摄效果，利用该方法观察了一种高铬铸铁中的（Ｆｅ，Ｃｒ）７Ｃ３碳化物与ＳｉＣ磨粒干滑动摩擦过程中的形貌演变。